Technical data

MAINTENANCE PROCEDURES

AND TROUBLESHOOTING

4.1 LUBRICATION INSTRUCTIONS

No lubrication is required.

4.2 TROUBLESHOOTING PROCEDURES

4.2.1. TROUBLESHOOTING

Table 4.1 lists common malfunctions that may occur with the equipment. Perform the tests, inspections

and corrective actions in the order they appear in the table.

This table does not list all of the malfunctions that may occur with your device, nor does it include all

tests, inspections, or corrective actions that may be necessary to identify and x defects. If you experi-

ence an equipment malfunction that is not listed, or suggested corrective actions do not correct the

fault, please contact Customer Support.

TABLE 41. OPERATOR’S TROUBLESHOOTING

MALFUNCTION TEST OR INSPECTION CORRECTIVE ACTION

1. Monocular fails to activate. Visual.

Check for defective, missing or

improperly installed battery.

Turn the power switch to RESET/ OFF,

and then turn it ON.

Replace battery or install it correctly.

2. IR source fails to activate. In a dark location with system turned

on, activate IR source.

Visually check IR source operation;

scene should brighten.

If IR source still fails to activate, please

contact Customer Support.

3. IR source indicator fails to

activate.

Visual. Please contact Customer Support.

4. Poor image quality. Check objective lens or eyepiece lens

focus.

Check for fogging or dirt on objective

lens or eyepiece lens.

Refocus.

Clean lens surfaces per paragraph 4.2.

Shop for Armasight products online at:

1.877.766.5412