Technical data

CAUTION:

• The PVS-14/6015 is a precision optical instrument and must be handled carefully at all times

to prevent damage.

• To prevent damage, be especially careful when leaving the helmet mount in the ipped up

position or removing the helmet mount from the helmet.

• Do not scratch the external lens surfaces or touch them with your ngers.

• Do not wipe the demisting shield with lens paper while it is damp, or using wet lens paper, as

this can damage the coating.

• To protect the image intensier, keep the lens cap securely tted over the objective lens when

the monocular is not in use or when it is being operated in daylight conditions.

• Light from the IR illuminator is invisible to the unaided eye. However, it can be detected by

other night vision devices.

• If you use the rubber eyecups for a long period of time, you may suer skin inammation. If

you develop any symptoms, consult a doctor immediately.

NOTES:

To avoid physical injury and damage to the equipment, carefully read and understand the fol-

lowing safety precautions.

• The equipment requires some ambient light (moonlight, starlight, etc.) to operate.

• Performance of the device in nighttime conditions depends on the level of ambient light in

the environment. Please remember the following:

— The level of ambient light is reduced by the presence of clouds, shade, or objects that block

natural light (trees, buildings, etc.).

— The equipment is less eective when operated in shadows and other darkened areas.

— The equipment is less eective when operated in rain, fog, sleet, snow, dust or smoke.

— The equipment will not “see” through dense smoke.

• At operating temperatures below -20°C (-4°F), the use of an alkaline battery is not recom-

mended, as the battery life will be severely reduced. Under said conditions, lithium-iron disul-

de 1.5V AA batteries or their equivalent should be used.

• The IR illuminator is intended for increased illumination, as needed, when viewing at a close

distance of up to 3m.

• For the purpose of returning defective components, retain all packaging materials.

Shop for Armasight products online at:

1.877.766.5412