Technical data

NOTE:

The gain control function is not available with the 6015 model.

NOTE:

Indicators showing that the battery is low and that the IR is active are both visible in the eye-

piece lens.

TABLE 31. MONOCULAR CONTROLS AND INDICATORS

CONTROLS AND INDICATORS FUNCTIONS

Power Switch

Controls the monocular and IR source, ON or OFF.

RESET/ OFF

Same as system OFF. Also resets monocular after high light

cut-o.

ON Monocular activated.

IR/ PULL

Turn the knob clockwise to momentarily activate the IR source.

For continuous operation of the IR, pull and turn the knob

clockwise from the ON position.

CAUTION

Do not use excessive force when operating the power switch.

Low Battery Indicator

The low battery indicator will blink on and o when there are less than 30

minutes of battery life remaining. It is visible through the eyepiece, just out-

side the intensied eld-of-view.

IR Source On Indicator

The IR Source On indicator will blink when the IR is activated. It is visible

through the eyepiece just outside the intensied eld-of-view.

Gain Control

(PVS-14 only)

Adjusts the system gain from a minimum value of approximately 25 to a

maximum value greater than 3,000.

Objective Focus Focuses objective lens. Adjusts for sharpest image of viewed object.

Diopter Adjustment

Focuses eyepiece lens for use without a need for glasses. Adjusts for sharpest

image of intensier screen.

Eye Relief Adjustment Adjusts the distance between your eye and the monocular.

Latch

Latch used for separation of monocular from head-mount/ helmet mount

adapter.

Battery Polarity Indi-

cators

This feature, molded into the battery housing, shows the proper orientation

of the battery. Some versions have a bubble molded into the top of the bat-

tery house that indicates polarity.

Shop for Armasight products online at:

1.877.766.5412