Manual

4.3.2. HEADMOUNT MAINTENANCE

a. Browpad Replacement

Replace the browpad when cracked, torn, or contaminated. Perform the following procedures to re-

move and replace the browpad.

(1) Firmly grasp the headmount and remove the old browpad.

(2) Gently press on the new browpad. Lightly smooth out any wrinkles in the new browpad.

b. Neck Pad Reinstallation

During operation of the MUNVM, it is possible for the neck pad to become separated from its position

on the headband. Perform the following procedure to reinstall the neck pad.

(1) Lift the upper headband strap retention tab (see Figure 4-1) allowing the neck pad strap to be in-

serted underneath.

(2) Slip the neck pad strap all the way under the upper strap retention tab and then pull the lower part

of the neck pad strap under the lower strap retention tab.

(3) Repeat steps 1 and 2 for the other side of the headband and neckband if necessary.

c. Lacing the Sliding Bar Buckles

NECK PAD STRAP

LOWER STRAP

RETENSION TAB

UPPER STRAP

RETENTION TAB

Figure 4-1. Reinstalling the Neck Pad

MOVEABLE

SLIDING BAR

FIXED

SERRATED BAR

Figure 4-2. Threading the Sliding Bar Buckles