Technical data

16
ITEM NO. DESCRIPTION
QUANTITY
10
Platform Ring
A mounting system with a Weaver type rail. Allows the IR850 or other additional
equipmenttobeinstalledonadayscopewithttingdiameterof25.4or30mm.
1
11
Special Wrench
An instrument used for repositioning the adapter in the CO-MR battery cap,
depending on the battery being installed.
1
12
CR123А Battery
A single lithium battery used to power the CO-MR. A single lithium battery used to
power the IR850.
2
13
Operation and Maintenance Manual
Provides safety information, equipment description, mounting procedures,
operating instructions, and preventive maintenance checks and services
(including a List of Spare Parts).
1
14
Hard Case
A protective case used for shipping/storage of the CO-MR and its accessories.
1
2.4 OPTIONAL EQUIPMENT
OptionalitemsareshowninFigure2-4andlistedinTable2-11.
TheITEMNO.columnindicatesthenumberusedtoidentifyitemsinFigure2-4.
The PART NO. column indicates the primary number used by the manufacturer to identify an item.
FIGURE 24. OPTIONAL EQUIPMENT
1
2
3
4
TABLE 211. OPTIONAL EQUIPMENT
ITEN NO. DESCRIPTION PART NO.
1
Mount for IR illuminator #60
A Weaver type rail mounted to the CO-MR in place of its mount. Allows
the IR850 or other additional equipment to be installed on the CO-MR.
ANAM000031
2
Scope Mounting System 1 #40
A mounting system used to install the CO-MR on the lenses of speci-
eddayscopes.Includesaclampwithinsertsthatwillt25.4and
30mm diameters.
ANAM000009
-
Scope Mounting System 2 #41
A mounting system used to install the CO-MR on the lenses of speci-
ed day scopes. Includes a clamp with inserts that will t 38 and
42mmdiameters.
ANAM000010
TABLE 210. CONTINUED