Manual
3
WARNING:
Remember to reinstall the safety lock screw after you have complet-•
ed operation.
The light from the equipment’s IR laser emitter(s) is invisible to the •
naked eye. However, the light can be detected by all night vision de-
vices (NVD). To reduce the risk of detection, avoid prolonged activa-
tion of the IR laser(s).
The IR light is more detectable by other NVDs when used in smoke, •
fog and rain. Avoid prolonged activation of the IR laser(s) in these
conditions.
WARNING:
When installing the equipment on a weapon, be sure the weapon is •
CLEAR and that the SAFETY is on before proceeding.
Take note of the laser safety warning label sticker located near the •
laser emission aperture. NEVER REMOVE this sticker, which identies
laser wavelengths, laser output power sources, and the safety class
of the equipment according to the IEC 60825-1:2007 standard.
NEVER LOOK INTO THE LASER BEAM.•
DO NOT leave the Drakos activated when not in active use.•
When adjusting the equipment boresight, beware of reections •
from optical surfaces.
CAUTION:
Do not dismantle the equipment.•
Keep the equipment clean. Protect it from moisture, dramatic tem-•
perature changes, and electric shocks.
DO NOT drop or hit the equipment.•
DO NOT force the equipment controls past their stopping points.•
Do not store the equipment with the battery still installed.•
Thoroughly clean and dry each item before replacing them in the •
storage carton.