User guide

34
4
PREVENTIVE MAINTENANCE AND
TROUBLESHOOTING
4.1 PREVENTIVE MAINTENANCE CHECKS AND SERVICES
4.1.1 PREVENTIVE MAINTENANCE CHECKS AND SERVICES PMCS
Table 4-1 Preventive Maintenance Checks and Services (PMCS), has been provided so that you can keep
your equipment in good operating conditions.
Perform functional tests in the order listed in Table 4-1.
Operating procedures are detailed in Chapter 3.
Explanation of Table Entries:
SEQ NO. column. Sequence numbers are for reference and appear in the order required to perform
checks and services.
LOCATION/ITEM TO CHECK/SERVICE column. Indicates the location and the item to be checked or
serviced.
PROCEDURE column. Details the checking/ servicing procedure.
NOT FULLY MISSION CAPABLE IF ... column. Indicates what faults will prevent your equipment from
operating successfully.
TABLE 41. PREVENTIVE MAINTENANCE CHECKS AND SERVICES
SEQ
NO.
LOCATION ITEM TO
CHECK/SERVICE
PROCEDURE
NOT FULLY MISSION
CAPABLE IF ...
PRE-OPERATIONALCHECKS
1 Completeness Open storage/carrying case, inventory items by comparing
them with the data specied in this manual.
Missing items.
2 Carrying Case Shake out loose dirt or foreign material. Inspect for tears,
cuts, excess wear or damage.
3 Body Inspectforcracksordamage.ScratchesandgougesareOK
ifoperationisnotaected.Inspectformissingparts.
Clean as required.
Cracked or damaged. Missing parts.
4 Objective Lens Cap Inspect for cuts, tears and dirt.
Clean as required.
Cap is torn or cut. Cap is not secured to
the housing of the lens.