User guide

3
WARNING:
When installing the equipment on a weapon, verify that the weapon is clear and that the safety
is on before proceeding.
WARNING:
This product contains natural rubber latex, which may cause allergic reactions! The FDA
has reported an increase in the number of deaths that are associated with an apparent sensitiv-
ity to natural latex proteins. If you are allergic to latex, it is a good idea to learn which products
contain it and strictly avoid exposure to those products.
WARNING:
It is recommended that you use an eyecup on the eyepiece of the day scope. This will allowfor
comfort and adjustment. It will also prevent light from escaping through the eyepiece and alert-
ing other NVD users to your location.
CAUTION:
Although the equipment is highly resistant to damage from light overload, DO NOT point it,
either powered or inoperative, directly at the sun or any other source of high-intensity light
that the unprotected human eye cannot tolerate (such as welding arc). To prevent inadvertent
exposure to these light sources, never leave the equipment unsupervised with the objective
lens cap removed.
CAUTION:
• Donotdismantletheequipment.
• Keeptheequipmentclean.Protectitfrommoisture,dramatictemperaturedrops,andelec-
trical shocks.
• DONOTdroporhittheequipment.
• DONOTforcetheequipmentcontrolspasttheirstoppingpoints.
• DONOTleavetheequipmentactivatedduringbreaksinoperation.
• Verifythattheequipmentisobeforeinstallingabattery.
• Toavoidlosingunsaveddata,DONOTremovethebatteriesordisconnectanexternalpower
source while the Cipher is on.
• Donotstoretheequipmentwiththebatteriesstillinit.
• Thoroughlycleananddryeachitembeforestoringtheminthecarryingcase.
• Toavoiddeformationordamage,removethelightsuppressorfromtheCipherbeforeplac-
ing the equipment in storage.
• ScopeMountingSystemsarenot recommended for installing the Cipher on rearms with
vigorous recoil (0.308 Win or stronger).
NOTES:
• OpticalaxesoftheCipheranddayscopeshouldalign.Itisnotrecommendedforthedis-
tancebetweentheaxestoexceed3mm.IfthedierenceintheaxisheightsoftheCipher
and day scope above the weapon rail exceeds 3 mm, you will need to replace the day scope
mounting rings or monoblock.
• Inadvertentsundamageisnotconsideredadefectinmaterialorworkmanship,andisthere-
fore not covered in the product warranty.