Manual

39
REASSEMBLY
LOWER RECEIVER ASSEMBLY
Insert buffer spring (1) and buffer (2).
CHARGING HANDLE AND BOLT CARRIER
NOTE
The extractor has a silicone insert (2) in the spring. Don’t lose it.
1. If the spring comes loose, seat the large
end of the spring in the extractor. Assure
the reinforcement ring is around the spring.
2. Insert the extractor (1) with spring
assembly into bolt.
3. Push extractor until the holes on the
extractor (3) and bolt are aligned and insert
the extractor pin (4).
4. Slide the bolt assembly (6) into the bolt carrier (7) only far enough to insert the cam
pin.
1
2
3
4
2
1
6
7