Manual

35
3. Lightly lubricate the inner and outer surfaces of the bolt carrier (8). Generously
lubricate the slide (9) and the cam pin area (10) of the bolt carrier.
4. Lightly lubricate the charging handle (11).
11. Dry the key of the bolt carrier assembly (8) with a pipe cleaner. Place one drop
of lubricant inside the key.
Note: Carbon in the groove at the bottom of the gas cylinder in the carrier cannot
accumulate enough to become a problem. Efforts to remove it cause more damage than
leaving it. Avoid the instinct to over clean your rifle.
8
9
10
11
8