Manual

34
1. Inspect the charging handle (1) for cracks, bends or breaks.
2. Inspect the bolt assembly (2) for cracks or fractures, especially in the cam pin hole
area.
DO NOT interchange bolts between rifles.
3. Inspect the firing pin retaining pin (3) for bends, breaks, or dents.
4. Inspect the bolt cam pin (4) for cracks or chips. Assure that the firing pin spring is
installed with the tight end in the firing pin’s groove.
5. Inspect the firing pin (5) for bends,
cracks, or a sharp, chipped, or blunted tip.
1. Lightly lubricate the firing pin (1) and firing pin recess (2) in the bolt assembly.
2. Generously lubricate the outside of the bolt cam pin (3) and the firing pin retaining pin
(4). Make certain to lubricate the bolt cam pin hole (5), bolt rings (6), and outside of the
bolt.
1
2
3
4
5
2
6
5
1
4
3