Manual

33
CHARGING HANDLE AND BOLT CARRIER ASSEMBLY
1. Clean all parts and outer surfaces of the bolt carrier assembly with a swab
saturated with cleaning solvent.
2. Clean the bolt carrier key (2) with a worn bore brush dipped in solvent and dry
with a pipe cleaner.
3. Remove carbon deposits and dirt from the locking lugs (3) with a bore brush dipped in
solvent.
4. Clean the areas behind the bolt rings (4) and under the lip if the extractor (5).
5. Press the ejector in repeatedly to remove accumulated brass shavings from the ejector
hole and assure the ejector moves freely. Lubricate it generously.
2
4
5
3