Manual
24
3. Pull the charging handle (1) back and down to remove it.
4. Move the bolt assembly (3) forward to the unlocked position. The firing pin retaining
pin (4)is retained in the carrier group by friction. Press it out of the carrier to remove the
firing pin. Do not open or close the split end of the firing pin retaining pin.
5. Push in on the bolt assembly (3) to put it in the locked position.
6. Catch the firing pin (5) as it drops out of the rear of the bolt carrier assembly (2).
DO NOT REMOVE THE FIRING PIN SPRING (IF INSTALLED) FROM THE
FIRING PIN.
1
3
2
5