Manual

13
Loosen the clamping nut of the sight ring so that the sight can be slipped over the rail in
the numbered slot previously used to zero the rifle. Mounting the sight in a different slot
may produce a slight shift of bullet impact.
Once the position of the sight on the receiver has been selected, shift the sight forward on
the rail interface until the rails on the bottom of the rings stop against the front of the slot
on the receiver to assure that the sight cannot shift forward during recoil.
If you purchased the optional Leupold scope, see its enclosed “Riflescope Owner’s
Handbook” and “Ranging System for the Mil Dot Reticle” booklets for installation, use,
and maintenance instructions.
5.3. ADJUSTING THE BUTTSTOCK
The adjustable buttstock is provided to allow the rifle to be adjusted to fit the operator or
to accommodate winter clothing, body armor, or different firing positions. On the
SuperSASS rifle, both the height of the cheekpiece and the length of the buttstock are
easily adjustable by turning the integral knobs.