Manual

12
If your shot group is not in the center of the target, adjust the rear sight to move the next
group. Turning the windage knob clockwise moves the impact RIGHT. Turning the
windage knob counter-clockwise moves the impact LEFT. Turning the front sight
clockwise (viewed from above) RAISES the impact. Turning the front sight counter-
clockwise (viewed from above) LOWERS the impact.
Repeat steps 2 and 3 until the group is centered on the target.
ArmaLite
®
places numbers on the windage knob so that you can record your zero for
future reference.
APPROXIMATE IMPACT SHIFT PER CLICK OF ADJUSTMENT:
Windage (at rear sight): ½” at 100 meters.
Elevation (At front sight): 1 ¼” at 100 meters.
5.2. INSTALLING AND REMOVING THE TELESCOPIC SIGHT
Optional accessories for the SuperSASS include a Leupold Mark 4 telescopic sight fixed
to the receiver with A.R.M.S. number 22 lever lock scope rings. It is a superb optic
designed to assure clear vision and accurate fire.
Clean the rail interface of the upper receiver to assure that the sight settles into its proper
position. Even a small amount of dirt can cause the sights to be off.