SDS

Armaflex

520 BLV Contact Adhesive Page 5 of 8
12-May-2015
be sought from glove suppliers regarding the glove’s breakthrough time for the
ingredients listed in Section 3.
Eye / face protection : Chemical goggles are recommended. A full face shield may also be
necessary.
Other protective equipment : Full chemical-resistant protective clothing should be used whenever splashing
is anticipated. An eyewash station and safety shower should be made
available in the immediate working area.
General hygiene considerations : Avoid contact with eyes, skin and clothing. Avoid breathing vapors. Do not eat,
drink or smoke when using this product. Clean all equipment and clothing, and
shower with mild soap and water at end of each work shift.
Physical state : liquid Appearance : black liquid.
Odor : acetone
Odor threshold : N/Av pH : N/Ap
Specific gravity : approx.. 0.88 Boiling point : > 133°F (>56.5°C)
Coefficient of water/oil distribution : N/Av Melting/Freezing point : N/Av
Solubility in water : N/Av Vapor pressure (mm Hg @ 20°C / 68°F) : 180
Evaporation rate (n-Butyl acetate = 1) : 7 – 8 Vapor density (Air = 1) : 2
Volatiles (% by weight) : 67 – 71 General information : N/Av
Volatile organic compounds (VOCs) : 0 g/L (Calculated, SCAQMD Rule 1168)
Particle size : N/Av Flammability classification (GHS) : Flammable Liquid Cat. 2
Flash point : -4°F (-20°C) Lower flammable limit (% by vol) : 2.5 based on ingredients
Flash point method : Setaflash closed Upper flammable limit (% by vol) : 12.8 based on ingredients
Auto-ignition temperature : 869°F (465°C) estimated
Decomposition temperature : Not available
Viscosity : Not available Oxidizing properties : Not available
Explosion data: Sensitivity to mechanical impact / static discharge
: Static discharge can ignite product vapors. Not expected to be sensitive to
mechanical impact.
Stability and reactivity : Stable under the recommended storage and handling conditions prescribed.
Hazardous polymerization : Hazardous polymerization does not occur.
Conditions to avoid : Keep this product away from heat, sparks, flame, and other sources of ignition
(e.g., pilot lights, electric motors, static electricity).
Materials to avoid and incompatability
: Strong oxidizing agents; Reducing agents; Acids, Bases.
Hazardous decomposition products
: None known, refer to hazardous combustion products in Section 5.
Target organs : Central Nervous System (CNS); Skin; Eyes.
Routes of Exposure : Inhalation: YES Skin Absorption: YES Skin and Eyes: YES Ingestion: YES
Toxicological data : See below for individual ingredient acute toxicity data.
LC50 (4 hr)
LD50
Ingredients
Inhalation, rat, mg/L
Oral, rat, mg/kg
Dermal, rabbit,
mg/kg
Acetone
67-64-1
50.1
5800
20000
SECTION 9 – PHYSICAL AND CHEMICAL PROPERTIES
SECTION 10 – REACTIVITY AND STABILITY INFORMATION
SECTION 11 – TOXICOLOGICAL INFORMATION