SDS

Armaflex

520 BLV Contact Adhesive Page 4 of 8
12-May-2015
flush into surface water or sanitary sewer system. Notify the appropriate
authorities as required.
Incompatible materials : See Section 10.
Special spill response procedures
: If a spill/release in excess of the EPA reportable quantity is made into the
environment, immediately notify the national response center in the United
States (phone: [phone]).
US CERCLA Reportable quantity (RQ): Acetone (5000 lbs / 2270 kg).
Special Instructions : HIGHLY FLAMMABLE LIQUID AND VAPOR. May cause flash fire. Keep
away from fire, sources of heat, or sources of electrical discharges. Aspiration
Hazard – may enter lungs and cause damage. If ingested, do not induce
vomiting. Inhaling fumes may cause dizziness, drowsiness, nausea,
headaches, and/or other Central Nervous System (CNS) symptoms.
Developmental hazard - Contains a non-volatile chemical which may cause
birth defects or other reproductive harm. Avoid ingestion or absorption through
the skin.
Safe handling procedures : Wear chemically resistant protective equipment during handling. Use in a
well-ventilated area. Training the workers on the potential health hazards
associated with product vapor is important. Avoid breathing vapors. Avoid
contact with skin, eyes and clothing. Keep away from heat and sources of
ignition. Keep away from oxidizing materials. Keep containers tightly closed
when not in use. Wash hands and exposed skin thoroughly after handling.
Containers of this material may be hazardous when empty, since they retain
product residues (vapors, liquid).
Storage requirements : Store in a cool, dry, well-ventilated area. No smoking in the area. Do not store
near any incompatible materials (see Section 10). Storage area should be
clearly identified, clear of obstruction and accessible only to trained and
authorized personnel. Protect against physical damage.
Incompatible materials : See Section 10.
Special packaging materials : Always keep in containers made of the same materials as the supply
container.
Permissible exposure levels : No exposure limits have been established for the product itself. Below are
exposure limits for the components in the product.
Ingredients
CAS #
ACGIH TLV
TWA STEL
OSHA PEL
PEL STEL
Acetone
67-64-1
500 ppm 750 ppm
1000 ppm TWA N/Av
2400 mg/m
3
TWA
Acrylonitrile/Butadiene copolymer
9003-18-3
N/Av N/Av
N/Av N/Av
p-tert-butylphenol-Formaldehyde resin
25085-50-1
N/Av N/Av
N/Av N/Av
6,6'-di-tert-butyl-2,2'-methylene-di-p-
cresol
119-47-1
N/Av N/Av
N/Av N/Av
Ventilation and engineering measures
: Use with adequate ventilation. Provide adequate cross air circulation. Use
explosion-proof general or local exhaust ventilation to maintain air
concentrations below recommended exposure limits.
Respiratory protection : Respiratory protection is required if the concentrations exceed the TLV. If the
TLV is exceeded, wear a NIOSH/MSHA-approved organic vapor respirator.
Skin protection : Impervious gloves must be worn when using this product. Glove materials such
as nitrile rubber or Viton (fluorocarbon rubber) are recommended. Advice should
SECTION 7 – HANDLING AND STORAGE
SECTION 8 – EXPOSURE CONTROLS AND PERSONAL PROTECTION