Datasheet

Creating an Application

Build target settings must be selected separately for each build target in your project. To

set build target options for the

dhryansi

example:

1. Ensure that the DebugRel build target is currently selected. By default, the

DebugRel build target is selected when you create a new project based on the

ARM project stationery. The currently selected build target is displayed in the

Build Target drop-down list in the project toolbar (Figure 3-8).

Figure 3-8 Currently selected build target

2. Select DebugRel Settings… from the Edit menu. The name of this menu item

changes depending on the name of the currently selected build target. The

CodeWarrior IDE displays the DebugRel Target Settings panel (Figure 3-9 on

page 3-9). All the target-specific settings are accessible through configuration

panels listed at the left of the panel.

Note

Many configuration options are optional. However you must review the target

settings for each build target in your project to ensure that they are appropriate for

your target hardware, and your development requirements. See CodeWarrior IDE

Guide for configuration recommendations.

Click the build target drop-down list

to select the current build target.