Specifications

Configuration
ARM DUI 0447J Copyright © 2009-2014, ARM. All rights reserved. 3-2
ID052914 Non-Confidential
3.1 Configuration environment
This section describes the configuration environment and hardware of the Versatile Express
system using the Motherboard Express μATX and CoreTile Express and LogicTile Express
daughterboards.
Figure 3-1 shows the configuration architecture.
Figure 3-1 Configuration architecture
The configuration environment consists of the following hardware components:
• Motherboard Configuration Controller (MCC) on the Motherboard Express, V2M-P1.
• Daughterboard Configuration Controller on the CoreTile Express daughterboard and on
the LogicTile Express daughterboard.
• Configuration microSD card or Universal Serial Bus Mass Storage Device (USBMSD)
on the Motherboard Express, V2M-P1.
• Configuration EEPROM on the Motherboard Express, V2M-P1.
• ON/OFF/Soft Reset and Hardware RESET buttons on the on the Motherboard Express,
V2M-P1.
• USB-B port on the Motherboard Express, V2M-P1.
• Four UART ports on the Motherboard Express, V2M-P1.
• NOR flash on the Motherboard Express, V2M-P1.
microSD
card
(USBMSD)
USB-B
port
MCC
CoreTile Daughterboard in site 1
UART0 Port
UART1 Port
Motherboard Express (V2M-P1)
LogicTile Daughterboard in site 2
UART2 Port
HDRY
HDRY1
HDRY
UART3 Port
IO FPGA
HDRY2
MCC UART
MCC UART
DCC1 UART
DCC2 UART
CBCB
ON/OFF/Soft
Reset
Hardware RESET
Power-on detect
NOR
flash
CB
UART0 DSR and CTS
Configuration
EEPROM
Configuration
EEPROM
SCC Test Chip SCC FPGA
Configuration
EEPROM
Daughterboard
Configuration
Controller
Daughterboard
Configuration
Controller