Datasheet

DocID024647 Rev 1 87/138
RM0352 I
2
C bus interface
137
[23] SALM: slave arbitration lost mask. SALM enables the interrupt bit SAL.
(SMBUS mode)
0: SAL interrupt is disabled.
1: SAL interrupt is enabled.
[20] STDM: slave transaction done mask. STDM enables the interrupt bit STD.
0: STD interrupt is disabled.
1: STD interrupt is enabled.
[19] MTDM: master transaction done mask. MTDM enables the interrupt bit
MTD.
0: MTD interrupt is disabled.
1: MTD interrupt is enabled.
[18] WTSRM: write-to-slave request mask. WTSRM enables the interrupt bit
WTSR.
0: WTSR interrupt is disabled.
1: WTSR interrupt is enabled.
[17] RFSEM: read-from-slave empty mask. RFSEM enables the interrupt bit
RFSE.
0: RFSE interrupt is disabled.
1: RFSE interrupt is enabled.
[16] RFSRM: read-from-slave request mask. RFSRM enables the interrupt bit
RFSR.
0: RFSR interrupt is disabled.
1: RFSR interrupt is enabled.
[15] LBRM: length number of bytes received mask. LBRM enables the interrupt
bit LBR(SMBUS).
0: LBR interrupt is disabled.
1: LBR interrupt is enabled.
[6] RXFFM: Rx FIFO full mask. RXFFM enables the interrupt bit RXFF.
0: RXFF interrupt is disabled.
1: RXFF interrupt is enabled.
[5] RXFNFM: Rx FIFO nearly full mask. RXFN FM enables the interrupt bit
RXFNF.
0: RXFNF interrupt is disabled.
1: RXFNF interrupt is enabled.
[4] RXFEM: Rx FIFO empty mask. RXFEM enables the interrupt bit RXFE.
0: RXFE interrupt is disabled.
1: RXFE interrupt is enabled.