User guide

Getting Started
ARM DUI 0224I Copyright © 2003-2010 ARM Limited. All rights reserved. 2-19
• VFP=1/0 , defines VFP support (Default 0, no VFP support).
Note
The image must be build as a simple image. Scatter loading is not supported.
The build options define the subdirectory in the Builds directory that contains the
compile and link output:
<Debug>_<State>_<Endianness>_Endian + further component specific options
For example, Release_ARM_Little_Endian or Debug_Thumb_Big_Endian_NoDiskOnChip .
After rebuilding the Boot Monitor, load it into NOR flash, see Loading Boot Monitor
into NOR flash on page 2-20.