Specifications

Introduction
1-8 Copyright © 2004, 2006 ARM Limited. All rights reserved. ARM DDI 0287B
For more information on the CLCDC, see the ARM PrimeCell Color
LCD Controller (PL110) Technical Reference Manual and Chapter 5
Color LCD Controller (CLCDC).
General Purpose Input/Output (GPIO) interface
There are four GPIO interfaces in the ARM926EJ-S Development Chip.
Each GPIO interface provides eight programmable inputs or outputs.
The release version used is PL061 GPIO 1v0.
For more information on the GPIOs, see the ARM PrimeCell GPIO
(PL061) Technical Reference Manual and Chapter 9 General Purpose
Input Output (GPIO).
Smart Card Interface (SCI)
This connects to smart card, Security Identity Module (SIM) card, and
other modules.
The release version used is PL131 SCI 1v0.
For more information on the SCI, see the ARM PrimeCell Smart Card
Interface (PL131) Technical Reference Manual and Chapter 12 Smart
Card Interface (SCI).