Specifications

Preface
ARM DDI 0287B Copyright © 2004, 2006 ARM Limited. All rights reserved. xix
Chapter 9 General Purpose Input Output (GPIO)
Read this chapter for a description of the GPIO.
Chapter 10 Multi-Port Memory Controller (MPMC)
Read this chapter for a description of the MPMC.
Chapter 11 Real-Time Clock (RTC)
Read this chapter for a description of the RTC controller.
Chapter 12 Smart Card Interface (SCI)
Read this chapter for a description of the SCI.
Chapter 13 Synchronous Static Memory Controller (SSMC)
Read this chapter for a description of the SSMC.
Chapter 14 Synchronous Serial Port (SSP)
Read this chapter for a description of the SSP.
Chapter 15 Dual Timer/Counters
Read this chapter for a description of the dual timer/counter.
Chapter 17 Vectored Interrupt Controller (VIC)
Read this chapter for a description of the VIC controller.
Chapter 18 ARM Vector Floating Point Coprocessor (VFP9)
Read this chapter for a description of the VFP9.
Chapter 19 Watchdog Timer
Read this chapter for a description of the watchdog controller.
Appendix A Signals on Pads
Refer to this appendix for a list of signals on the input/output pads of the
ARM926EJ-S Development Chip.
Appendix B Mechanical and Electrical Specifications
Read this appendix for details on the ARM926EJ-S Development Chip
mechanical packaging and the electrical specifications.
Appendix C Timing Specification
Refer to this appendix for timing specifications.