Limited Computer Accessories User Manual

Preface

• ARM-Thumb

Procedure Call Standard (ATPCS) Specification (SWS ESPC

0002).

Refer to the following documentation for information relating to the ARM debug

interfaces suitable for use with RealView Debugger:

• ARM Agilent Debug Interface v1.0 User Guide (ARM DUI 0158)

• Multi-ICE version 2.2.2 User Guide (ARM DUI 0048).

Refer to the following documentation for information relating to specific ARM Limited

processors:

• ARM7TDMI (Rev 4) Technical Reference Manual (ARM DDI 0210)

• ARM7EJ-S (Rev 1) Technical Reference Manual (ARM DDI 0214)

• ARM9TDMI (Rev 3) Technical Reference Manual (ARM DDI 0180)

• ARM920T (Rev 1) Technical Reference Manual (ARM DDI 0151)

• ARM922T (Rev 0) Technical Reference Manual (ARM DDI 0184)

• ARM9EJ-S (Rev 1) Technical Reference Manual (ARM DDI 0222)

• ARM926EJ-S (Rev 0) Technical Reference Manual (ARM DDI 0198)

• ARM940T (Rev 2) Technical Reference Manual (ARM DDI 0144)

• ARM946E-S (Rev 1) Technical Reference Manual (ARM DDI 0201)

• ARM966E-S (Rev 2) Technical Reference Manual (ARM DDI 0213)

• ARM1020E Technical Reference Manual (ARM DDI 0177)

• ARM1022E Technical Reference Manual (ARM DDI 0237).

Refer to the following documentation for details on the FLEXlm

license management

system, supplied by GLOBEtrotter Inc., that controls the use of ARM applications:

• ARM FLEXlm License Management Guide (ARM DUI 0209).

Other publications

For a comprehensive introduction to ARM architecture see:

Steve Furber, ARM system-on-chip architecture (2nd edition, 2000). Addison Wesley,

ISBN 0-201-67519-6.

For the definitive guide to the C programming language, on which the RealView

Debugger macro and expression language is based, see:

Brian W. Kernighan, Dennis M. Ritchie, The C Programming Language (2nd edition,

1989). Prentice-Hall, ISBN 0-13-110362-8.

For more information about Oak and TeakLite processors from the DSP Group see:

http://www.dspg.com.