SDS

Page 3 of 7
Small amounts of spilled material can be disposed of in regular garbage. Use an absorbent inert material,
then rinse the area with water.
Prevent large industrial spills from entering waterways.
Methods and materials for containment and cleaning up
Block all drainage routes such as floor drains, storm sewers, and open doorways. Dispose of large spills
in drums or other large containers that can be sealed.
Section 7. Handling and Storage
Precautions for safe handling
No special precautions are needed for handling of the product in its final packaging.
For workers who are handling the finished product in bulk, safety glasses and gloves should be worn.
Conditions for safe storage, including any incompatibilities
Storage of the finished product in its final packaging should be in a dry place at temperatures between 40
and 80⁰F. Freeze/thaw studies have shown this product to be stable, however it is not recommended to
subject this product to long periods of freezing.
Section 8. Exposure Controls/Personal Protection
Control parameters
This product as supplied does not contain any hazardous materials with occupational exposure limits.
Appropriate engineering Controls
Eyewash stations
Showers
Ventilation systems
Individual protection measures such as personal protective equipment (PPE)
No special equipment needed under normal use conditions.
Section 9. Physical and Chemical Properties
Appearance: Clear or opaque viscous liquid
Color: Various
Odor: Typical of fragrance
pH: 6.0
Melting/Freezing point: Not available
Boiling point/boiling range: Not available
Flash point: Not available
Evaporation rate: Not available
Upper/Lower flammability limits: Not available
Vapor pressure: Not available
Vapor density: Not available
Relative density: 1.03 gr/cm3 @ 25⁰C
Solubility: Soluble to mostly soluble in water
Partition co-efficient: n-octanol/water: Not available
Auto-ignition temperature: Not available