SDS

Page 4/8
Safety Data Sheet
29 CFR 1910.1200
Printing date 08/29/2014 Reviewed on 08/28/2014
Trade name:
Membrane New Car
(Contd. of page 3)
39.2.3.3
Avoid contact with the eyes and skin.
·
Breathing equipment:
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure
use respiratory protective device that is independent of circulating air.
·
Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/
the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the
degradation
·
Material of gloves:
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality
and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the
resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the
application.
·
Penetration time of glove material:
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be
observed.
·
Eye protection:
Tightly sealed goggles
9 Physical and chemical properties
·
General Information
·
Appearance:
Form:
Liquid
Color:
Dark blue
·
Odor:
New car
·
Odour threshold:
Not available.
·
pH-value:
Not available.
·
Change in condition
Melting point/Melting range:
Not available.
Freezing point:
Not available.
Boiling point/Boiling range:
Not available.
·
Flash point:
70 °C (158 °F)
·
Flammability (solid, gaseous):
Not applicable.
·
Auto-Ignition temperature:
>100 °C (>212 °F)
·
Decomposition temperature:
Not available.
·
Explosion limits:
Lower:
Not available.
Upper:
Not available.
·
Vapor pressure:
0.25 hPa
·
Density:
Not available.
·
Relative density
Not available.
·
Vapour density
Not available.
(Contd. on page 5)
USA