Quick Start Guide

Need help?
We are here for you.
Visit www.arlo.com/support for quick answers and:
• How-to videos
• Troubleshooting tips
• Additional support resources
You can use the Dual Charging Station to charge Arlo Pro 4, Ultra,
Floodlight, and XL rechargeable batteries.
1. Connect the power adapter to the charging station.
2. Plug the power adapter into an indoor electrical outlet.
3. Insert one or two Arlo rechargeable batteries.
Battery charging
Mount your camera
1. Place the wall plate with the arrow
pointing up and secure it with screws.
For drywall, use the provided wall anchors.
2. Insert your camera with its battery into the
Anti-The Mount housing.
3. To attach the housing to the wall plate:
Align the small screw in the housing with
the dot on the wall plate.
Turn the housing clockwise until it clicks
into place.
Use the security key to tighten the small
screw.
4. Adjust your camera position, then nger-
tighten the mount lock (clockwise) to lock
the camera in this position.
Note: To release your camera from the
housing, insert the security key into
the security keyhole and turn the key
clockwise.
We recommend that you use your Dual Charging Station to fully
charge the camera battery before you mount the camera.