User Manual
Table Of Contents
- 1. Get to Know Your Camera
- 2. Get Started
- 3. WiFi Setup and Connections
- 4. Use Your Essential Indoor Camera
- 5. Modes, Rules, and Alerts
- Modes
- Select a mode
- Arm or disarm all devices
- Rules for modes
- Change motion sensitivity
- Use a rule to activate the camera’s siren
- Add a rule with an optional base station siren trigger
- Add a custom mode
- Arm only outdoor cameras connected to an optional SmartHub or base station
- Manage alerts
- Mute Notifications
- Schedule when your camera is armed
- Set up Arlo Geofencing
- Geofencing with multiple mobile devices
- 6. Change Your Settings
- Two-step verification
- Use face or fingerprint authentication
- Customize your profile
- Change your Arlo password
- Reset a forgotten password
- Grant access to friends
- Change the time zone
- Camera settings
- Video Settings
- Adjust the audio settings
- Adjust the flicker setting
- Turn the Essential Indoor Camera on and off
- Restart the camera from the Arlo app
- View device information
- Remove a device from your account
- Optional SmartHub and Base Station settings
- 7. Troubleshooting
- 8. Arlo Connect
58
Arlo Essential Indoor Camera
User Manual
Support
For product updates and web support, visit http://www.arlo.com/en-us/support/.
Arlo Technologies, Inc.
2200 Faraday Ave. Suite 150
Carlsbad, CA 92008 USA
Document publication date: September 2021
PN 202-50025-02
Trademarks
© Arlo Technologies, Inc. Arlo, Arlo logo, and Every Angle Covered are trademarks of Arlo
Technologies, Inc. Apple is a trademark of Apple Inc., registered in the US and other countries.
App Store is a service mark of Apple Inc. Google Play and the Google Play logo are trademarks
of Google LLC. Any other trademarks are for reference purposes.
Compliance
The regulatory marking is located at the bottom of the unit.
For regulatory compliance information including the EU Declaration of Conformity, visit
www.arlo.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
FCC ID: 2APLE18300406
IC: 23815-18300406
CAN ICES-003(B)/ NMB-003(B)
Federal Communication Commission Interference Statement:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.