User Manual
Table Of Contents
- 1. Get to Know Your Camera
- 2. Get Started
- 3. WiFi Setup and Connections
- 4. Use Your Essential Indoor Camera
- 5. Modes, Rules, and Alerts
- Modes
- Select a mode
- Arm or disarm all devices
- Rules for modes
- Change motion sensitivity
- Use a rule to activate the camera’s siren
- Add a rule with an optional base station siren trigger
- Add a custom mode
- Arm only outdoor cameras connected to an optional SmartHub or base station
- Manage alerts
- Mute Notifications
- Schedule when your camera is armed
- Set up Arlo Geofencing
- Geofencing with multiple mobile devices
- 6. Change Your Settings
- Two-step verification
- Use face or fingerprint authentication
- Customize your profile
- Change your Arlo password
- Reset a forgotten password
- Grant access to friends
- Change the time zone
- Camera settings
- Video Settings
- Adjust the audio settings
- Adjust the flicker setting
- Turn the Essential Indoor Camera on and off
- Restart the camera from the Arlo app
- View device information
- Remove a device from your account
- Optional SmartHub and Base Station settings
- 7. Troubleshooting
- 8. Arlo Connect
20Use Your Essential Indoor Camera
Arlo Essential Indoor Camera
User Manual
or ngerprint authentication (if applicable). This provides an extra layer of security to
protect your privacy.
3. To stop viewing and listening to the live feed, tap Stop .
Pan and zoom video
You can pan and zoom your video feed.
1. Open the Arlo app.
2. Tap Play
on the camera feed.
On a mobile device, use the pinch gesture to zoom, and touch and drag to move around
the zoomed-in frame.
On a computer, double-click to zoom. Le-click and hold and drag to move around the
zoomed-in frame.
Aer zooming in, the image stops and buers for about ve seconds to improve the quality
of video. When the buering stops, your zoomed-in video renders in high quality.
Record clips from live video
1. Open the Arlo app.
2. Tap the camera feed image.
3. Tap Record
to begin recording.
This icon turns red to indicate that you are recording the live feed.
4. To stop recording, tap Record
again.
Take a snapshot from live video
1. Open the Arlo app.
2. Tap the camera feed image.
3. Tap Snapshot
.
The snapshot is saved in your library.
Customize your camera feed image
If you use more than one camera, you can change the order in which the camera feeds display
on the Devices page. You can also zoom or rotate the camera feed image 180 degrees.