User Manual
Table Of Contents
- 1. Get to Know Your Camera
- 2. Get Started
- 3. WiFi Setup and Connections
- 4. Use Your Essential Indoor Camera
- 5. Modes, Rules, and Alerts
- Modes
- Select a mode
- Arm or disarm all devices
- Rules for modes
- Change motion sensitivity
- Use a rule to activate the camera’s siren
- Add a rule with an optional base station siren trigger
- Add a custom mode
- Arm only outdoor cameras connected to an optional SmartHub or base station
- Manage alerts
- Mute Notifications
- Schedule when your camera is armed
- Set up Arlo Geofencing
- Geofencing with multiple mobile devices
- 6. Change Your Settings
- Two-step verification
- Use face or fingerprint authentication
- Customize your profile
- Change your Arlo password
- Reset a forgotten password
- Grant access to friends
- Change the time zone
- Camera settings
- Video Settings
- Adjust the audio settings
- Adjust the flicker setting
- Turn the Essential Indoor Camera on and off
- Restart the camera from the Arlo app
- View device information
- Remove a device from your account
- Optional SmartHub and Base Station settings
- 7. Troubleshooting
- 8. Arlo Connect
18Use Your Essential Indoor Camera
Arlo Essential Indoor Camera
User Manual
The Privacy Shield
Your Essential Indoor Camera comes with an integrated Privacy Shield to give you an extra
level of privacy. The Privacy Shield automatically covers the camera lens when the camera is
disarmed, and opens when the camera is armed. Motion detection, audio detection, and the
camera microphone are turned o when the Privacy Shield is closed.
If you want to live stream your camera while it is disarmed, you must provide your Arlo
account password, face authentication (if applicable), or ngerprint authentication (if
applicable). This provides an extra layer of security to protect your privacy.
Close the Privacy Shield
The Arlo app lets you open and close the Privacy Shield by using modes, or by turning the
camera on and o. Do not use your ngers to physically open and close the Privacy Shield.
Use Disarmed mode to close the Privacy Shield
To disarm your camera and close the Privacy Shield:
1. Open the Arlo app.
2. Tap Mode.
3. Select your Essential Indoor Camera.
A list of modes displays.
4. Tap Disarm.
Your camera is disarmed, and the Privacy Shield covers the camera lens.