User Manual

10Get Started
Arlo Essential Indoor Camera
User Manual
• Solid amber. An internet connectivity error occurred. Make sure that your WiFi router is
connected to the internet and your camera is connected to your WiFi network.
• Alternating blue and amber. A rmware update is in progress.
Wall mount your camera
You can place your Essential Indoor Camera on a at surface or you can mount it on a wall.
Your camera comes with a mount and a screw kit.
Note: You must follow the instructions in the Arlo app when you rst install your camera. Do
not begin mounting your camera before the Arlo app instructs you to during the installation
process.
You need the following items to mount your Essential Indoor Camera:
• A power drill with a 15/64 inch (6 mm) drill bit
• A Phillips-head screwdriver
• A pencil (optional)
• The wall plate and screw kit that came with your camera
To wall mount your camera:
1. Place the wall plate that came with your camera on the wall where you want to mount
your camera.
2. Use a pencil to mark the location of the two holes in the wall plate and then remove the
wall plate.
3. Use a 15/64 inch (6 mm) drill bit to drill two holes into the wall.
4. Place the wall plate back onto the wall, and align it with the holes.
5. While holding the wall plate in position, use a Phillips-head screwdriver to fasten a screw
into each hole.
If you’re mounting the camera on drywall, use the drywall anchors we provide.