Download

31
USB Device Storage With Arlo Pro 2
View the USB Storage Device Status
The Arlo app notifies you if the USB storage device is getting full or if the USB
storage device is not the correct format. You can also use the Arlo app to view the
USB storage device status.
¾ To view the status of a USB storage device connected to the base
station:
1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a
browser.
The Devices page displays.
2. Tap or click Settings > My Devices.
The base station and a list of cameras display.
3. Tap or click the base station.
The Device Settings page displays.
4. Tap or click Local Storage.
The Local Storage page displays.
The USB Device status shows whether the USB storage device is ready, must be
formatted, or is full.
Safely Eject and Remove a USB Storage Device
Note: USB storage devices must be safely ejected so that recordings do not occur as you
are removing the USB storage device. Removing the USB storage device while it is in use
can cause the USB storage device to become permanently unusable. The files on the USB
storage device might be corrupted.
If you remove the only USB storage device that is connected to your base station,
USB recording is disabled until you connect another USB storage device. If another
USB storage device is already connected when you remove the enabled USB
storage device, USB recording is automatically enabled on the other USB storage
device instead.