User Manual

39
Modes, Rules, and Smart Alerts
7. To change your radius setting, tap the radius icon, select a radius size, and tap
Next.
Radius size options are Small, Medium, or Large (approximately 150 meters,
250 meters, and 500 meters, respectively).
8. Enter a name for your location and tap Next.
The Away Mode page displays a list of available modes. The away mode is the
detection mode used by the camera when you are away from the location that
you specified.
9. Select an away mode and tap Next.
Note: When your mobile device is out of zone, the Arlo device defaults to the away mode. Most people
select Armed or Custom Mode while they are away.
10. Select a home mode and tap Next.
Note: When your mobile device is in zone, the Arlo device defaults to the home mode. Most people select
Disarmed or Custom Mode while they are home.
If you use more than one enabled mobile device, you might be asked to select an
Arlo device to connect it to.
11. To select the preferred mobile device, tap the device and then tap Next.
12. Tap Save.
Geofencing With Multipe Mobile Devices
If you want multiple mobile devices to participate in your Arlo geofencing, ensure
that the required conditions are met, and then follow the steps to enable or
disable geofencing for the devices.
Ensure that these conditions are met:
• Your Arlo devices are online.
• Your geofencing feature is enabled.
• Your friend’s mobile device is added to your account.
For more information about adding devices, see Enable or Disable Geofencing
for Friends’ Mobile Devices on page 40.
• (Required when your friend wants to participate in geofencing) Your friend is
logged in to the Arlo App on his or her mobile device.
• (Required when your friend wants to participate in geofencing) The GPS or
location service enabled on your friend’s mobile device.