Owner Manual

PROPANE TANK WARNINGS
• Make sure to organize fuel hose to prevent accidental tripping.
• Only use standard 20-pound propane tanks.
• Maximum gas supply pressure is 250 PSI.
• Do not fill tank more than 80% of its capacity.
• Do not use tank if any part of it is damaged; rust and dents can be dangerous.
• Propane tank must have a collar to protect the gas valve.
• Using too much propane gas may result in gas pooling and will not burn.
• Check for leaks by brushing a mixture of soap and water on all connections. If large bubbles form when
gas is turned on, there may be a leak.
• If you smell gas:
- Do not attempt to light appliance.
- Extinguish flames and disconnect tank.
- Move people away from the immediate area.
• Do not try to repair leaking tank. Contact a professional to repair or replace tank.
HARDWARE
1
4 PCS
M6 x 15mm
SCREW
M6 x 20mm
SCREW
M6 x 35mm
SCREW
2
16 PCS
3
2 PCS
TOOLS REQUIRED
APPROXIMATELY
30 MIN.
ASSEMBLY
1 PERSON
ASSEMBLY
M6 WASHER
4
22 PCS
ALLEN WRENCH
(PROVIDED)
1 AAA BATTERY
+
AAA
-
5
4 PCS
BRACKET
BRACKET WITH
FOOT
6
4 PCS
FLAT HEAD
SCREWDRIVER
BURNER
SCREW
7
4 PCS
BURNER
WASHER
8
4 PCS