Owner Manual

Page 1 / 2
ASSEMBLY
DO NOT FULLY TIGHTEN THE NUTS & BOLTS BEFORE ASSEMBLING THE ENTIRE RIM.
1. Set Panels (A) upright and align the holes on the panels.
2. Connect the panels by hand-tightening 2x Bolt (B) and 2x Nut (C).
3. Repeat Steps 1 & 2 until all panels are connected.
4. Tighten all hardware using a Phillips screwdriver (not included).
C B
  
A Panel 4
B Bolt 8
C Nut 8

Phillips Screwdriver
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
FIRE PIT
Read the assembly instructions carefully and follow the care instructions. Save these instructions for future reference.

WARNING
CHOKING HAZARD — This
item contains small parts that can
be swallowed by children. Keep
children away during assembly.
Thank you for choosing our products. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with the
date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine the cause
of defects and for future quality control. If you have any questions, comments or concerns, feel free to contact us.