Cut Sheet

One-piece Steel MC Cable Hangers
Mount in any direction, on variety of surfaces • Meets 2008 NEC
MORE
on
reverse
1 Stauffer Industrial Park
Scranton, PA 18517
800/233.4717
Fax [phone]
www.aifittings.com
Arlington
Patent pending
SMC8
S
teel cable hanger
f
or up to eight cables
Hang Flex, MC, AC, and HCF cables
a
ny which way with our one-piece
galvanized SMC series steel cable
h
angers! They mount on a variety
of surfaces, in any direction.
A
vailable in three styles, our SMC
hangers are listed to support and
s
ecure 14/2 to 10/4 cables – as
required by NEC 2008 330-30.
They are the best and most
economical hangers in the industry
that meet the new requirements for
NEC 300.4(E), specifically the
installation of flexible metal jacketed
cable under corrugated metal roof
decking.
The outer surface of cables other than
rigid and IMC must now be at least
1-1/2" (38 mm) from the surface of
the roof decking.
Our SMC hangers
exceed this requirement, keeping
cable away from the surface by more
than 2".
SMC8 holds up to eight cables.
SMC4 holds up to four. SMC4F
mounts flat, holding up to four
cables
on one side of the hanger.
• Cost less than cable tray
• Secure installation with
a screw driver
• Mount in any
direction
at
www.aifittings.com
View V
ideo
SMC8
Stacked
SMC4
F
or up to
f
our cables
SMC4
SMC4FSMC8
Cable
Decking
Arlington’s steel MC cable hangers meet
the
NEW REQUIREMENTS of NEC 300.4(e)... for installing MC
or AC metal jacketed cables under corrugated metal roof decking.
The outer surface of cable must be 1-1/2" from the
underside of the decking.
Our SMC hanger
s e
xceed this
requirement!