Install Instructions

Email: Sales@aifittings.com | Fax: [phone] | Tel: [phone] | www.aifittings.com
FAN/FIXTURE BOXES
R-18
CATALOG
NUMBER
UPC/DCI/NAED
MFG #018997
DESCRIPTION
/ CU. IN.
UNIT
PKG
STD
PKG
DIM
A
DIM
B
FBX900 75224
Adjustable; Fits cathedral
ceilings 80º or greater/14.5 cu. in.
1 1 2.300 13.200
Scan For Video
Fan & Fixture Mounting Box with Adjustable Brackets for New Construction
Mounts fans and fixtures on cathedral ceilings between two framing members for perfect
centering within room.
FEATURES AND BENEFITS
• Expandable brackets hold box securely between joists—no need to cut and nail 2x4s to
center the fan or fixture
• Allows fans/fixtures to be perfectly centered within room
• Large, 8” square mounting surface handles newer fans with larger canopies
• No loose parts to misplace—totally self-contained!
• Installs quickly and securely
• Includes a template to level and position brackets between rafters
• Taller sides fit cathedral ceilings with angles greater than 80°
• Paintable, textured finish
• Fan/fixture installation screws are parked…ready for easy fan/fixture bracket installation!
• UL rated: 70 lb fan/fixture; CSA rated: 50 lb fan/fixture
FBX900 INCLUDES…
Expandable brackets with
mounting screws, screws
to adjust box position,
mounting block with built-
in electrical box, installed
NM94 cable connector, and
two parked-in-place fan/
fixture bracket installation
screws (ready for installer).
For fan/fixture box information, refer to FB900 on page R-16.
Refer to chart on page R-25 for load ratings and number of single conductors.
PATENTED.
B
A
Adjustable from 1’-2” to 2’-0”
3
INSTALLATION INSTRUCTIONS
Note: Install fan or fixture
(not included) in accordance
with manufacturer’s
instructions and all local
applicable electrical codes,
using the parked screws
provided.
Loosen the
screws noted in
first illustration.
Slide box
to center it
between rafters.
Tighten screws.
Install wires.
Remove and use these
screws to attach bracket
ends to rafters
“Tooth” holds
brackets
temporarily in
place on rafter
Loosen these
screws to expand
brackets and
position box
between rafters
Cut and position drywall to fit
around the box. (Note: captive
screws in box.) Install fan or
fixture per manufacturer’s
instructions using captive
installation screws.
For proper fan/fixture
installation, use supplied
template to level and
position brackets between
rafters. Remove captive
screws on sides of brackets
and use to attach FBX900
assembly to rafters.
21
E170558
LR49636