Product Overview

Arlington
www.aifittings.com | Tel: [phone] | Fax: [phone] | Email: Sales@aifittings.com
FAN/FIXTURE BOXES
R-7
For Joist or Rafters 16” to 24” on center
A
B
C
Cut a 4-1/16” diameter hole in
ceiling. Remove box from sled
and fit mounting bracket into
hole. Position bracket between
joists, with bracket resting on
the ceiling.
Tighten the hex bar with a
wrench to secure bracket
between joists. As the hex bar
is tightened, bracket ends bite
into the joists, holding the
unit secure.
Pull cable through installed
NM cable connector. Reattach
box, and center it in hole.
Attach fan/fixture bracket with
supplied screws.
CATALOG
NUMBER
UPC/DCI/NAED
MFG #018997
DESCRIPTION
/ CU. IN.
UNIT
PKG
STD
PKG
DIM
A
DIM
B
DIM
C
FBRS4200R 75315
2” Box Depth
20.0 Cu. In.
1 10 3.563 3.438 13.979
Scan For Video
1 2 3
Steel Fan & Fixture Box with Adjustable Mounting Bracket for Existing Construction
Heavy-duty, plated steel fan/fixture box with fully adjustable mounting bracket for retrofit
installations. Adjusts from 16” to 24” o.c. spacing.
FEATURES AND BENEFITS
• No parts to lose—installation and adjustment screws ship parked in place
• Installs quickly and securely between joists or rafters 16” to 24” o.c.
• Fan/fixture installation screws are parked…ready for easy fan/fixture bracket installation!
• UL rated: 70 lb fan/90 lb fixture at 24” o.c. and 70 lb fan/150 lb fixture at 16” o.c.;
CSA rated: 50 lb fan/fixture
Refer to chart on page R-22 for load ratings and number of single conductors.
PATENTED.
Note: Install fan or fixture (not included) in accordance with manufacturer’s instructions and all
local applicable electrical codes, using the parked screws provided.
INSTALLATION INSTRUCTIONS
FBRS4200R INCLUDES…
Box/bracket, screws to adjust
box position, installed NM
cable connector, multiple
KOs, and two screws for fan/
fixture bracket installation
(screwed in place until
removed by installer).
NEW
Higher Weight
Ratings
E48106
LR49636