Brochure

Catalog UPC/DEI/NAED Indoor IN BOX™ For New Construction Unit/Std
Number Mfg. #018997 Device Box Color Pkg
DVFR1W 14330 Single gang Power or low voltage White 4
DVFR1BL 14329 Single gang Power or low voltage Black 4
DVFR2W * 14331 Two-gang combo box Power and/or low voltage White 4
DVFR2BL * 14335 Two-gang combo box Power and/or low voltage Black 4
DVFRC 14337 White 10
DVFRCBL 14336 Black 10
OPTIONAL Box Cover
Covers single or two-gang IN BOX when not in use.
*Includes voltage separator
Catalog UPC/DEI/NAED Indoor IN BOX™ For New Construction Unit/Std
Number Mfg. #018997 Device Box or Retrofit Color Pkg
DVFR3W 14340 Three-gang combo box Power and low voltage White 1
DVFR3BL 14341 Three-gang combo box Power and low voltage Black 1
DVFR4W 14342 Four-gang combo box Power and low voltage White 1
DVFR4BL 14343 Four-gang combo box Power and low voltage Black 1
Includes non-metallic recessed box, voltage separator, two NM94 and one NM95 cable connectors, one
trim plate, one decorator-style wall plate (three-gang for three-gang box; four-gang for four-gang box).
Note tabs for
proper positioning
of box for
1/2" wall finish.
Recessed Indoor IN BOX
™
Single through four-gang styles • For New or Old Work
Distributed by
Patents pending
DVFR3&4 0110/25M
1 Stauffer Industrial Park
Scranton, PA 18517
800/233.4717
Fax [phone]
wwwwww..aaiiffiittttiinnggss..ccoomm
wwwwww..aarrllnneeww..ccoomm//IInnBBooxxIInntt
Arlington
©2009 Arlington Industries, Inc.
1 Mount box
to stud.
New Construction Installation
DVFR3W
R
R
CSA with grounding lug only
4 Tighten mounting wing screws to
pull the box securely against the
wall board.
2 Install wall board. Pull wires.
I
nsert voltage separator if
installing power and low voltage
Class 2 wiring.
3 Attach paintable trim plate with
screws provided.
Face Plate
DVFR1W
Single-gang
for power or low voltage
Optional
Box
Cover
DVFRC
1 Mark box location. Cut hole.
Attach trim plate to box with
supplied screws. Pull wire(s).
Insert box into hole
.
Retrofit Installation
4 Finished installation – power and
low voltage in the same three-
gang indoor IN BOX.
2 Tighten
mounting
wing screws
to pull the
box securely
against the
wall board.
3 Insert voltage separator if installing
power and low voltage Class 2
wiring.
Three-gang DVFR3
Four-gang DVFR4
NEW!
DVFR4W
DVFR2W
Two-gang with separator
for power and low voltage
Try them all...indoor IN BOX
™
recessed boxes
for new or
old work
Trim
plate
Separator
3 &4-gang indoor IN BOX spc sht 1/14/10 12:03 PM Page 2