Product Overview
K-3
Arlington
www.aifittings.com | Tel: (800)233-4717 | Fax: (570)562-0646 | Email: Sales@aifittings.com
IN BOX™
Completed installation with
weatherproof-in-use cover.
DBVM1C shown.
DBVM1C
DBHM1W
CUTAWAY
Showing IN BOX and plastic block bushing mounted in
concrete block
IN BOX
Stucco
NM cable connector
NM cable
Block bushing
Cable
(Ready for assembly of furring strips and drywall)
Mounts
to block
Washer
A
B
C
22 cu. in.
D
E
Scan For Video
WEATHERPROOF-IN-USE
EXTRA-DUTY
Low Profile IN BOX™ for New Construction Stucco, Textured Surfaces, and Rigid Siding
One-piece, 22.0 cu. inch recessed electrical box with weatherproof-in-use extra-duty cover for
stucco over masonry or wood construction. Also for cementitious/fiber rigid lap siding. Non-
metallic cover and base. Accepts most single gang wiring devices and uses standard indoor wall
plates or a GFCI cover plate. Box and white cover are textured/ paintable. UV rated plastic for
long outdoor life.
FEATURES AND BENEFITS
• One-piece assembly replaces the installation of an electrical box and bubble cover assembly
• Installs in the wall, so less of it shows outside
• Holes in flange allow stucco to bond firmly
• Install option: Cover is removable for easier device installation
Add suffix “GC” to Catalog # when ordering in Canada, for example DBVM1CGC.
Replacement covers available on page K-17.
2-Gang style available on page K-8.
PATENTED. ADDITIONAL PATENTS PENDING.
Note: Meets 2015 CEC (Rule 26-702), NEMA 3R, 2017 NEC 406.9 (b); Where a weatherproof-in-use cover
is required for 15 or 20 AMP receptacles installed outdoors.
In Box for new stucco,
textured surfaces, and rigid
siding includes…
Box with weatherproof-in-use
extra-duty cover; installed bug
plugs; (1) standard duplex and
(1) standard GFCI face plate;
(1) NM cable connector; block
bushing with washer; and an
in-place, disposable mud cover.
INSTALLATION INSTRUCTIONS for new masonry construction
Make a 3-1/4” x 5-1/2” hole in
block. Pull wiring through plastic
block bushing and opening in
block. Block bushing mounts to
interior side of block.
1 2
Install NM cable connector and
wire. Attach recessed
IN BOX to block. Holes in flange
allow stucco to bond firmly.
3
Install wiring device per
manufacturer’s instructions,
Local, and National Electrical
Codes. Accepts most devices and
a standard indoor wall plate.
4
Note: Additional Installation Methods shown on page K-4.
Bug Plugs ship
installed in all
IN BOX styles
to seal unused
cord hole
openings.
CATALOG
NUMBER
UPC/DCI/NAED
MFG #018997
ORIENTATION/
COVER COLOR
UNIT
PKG
STD
PKG
DIM
A
DIM
B
DIM
C
DIM
D
DIM
E
DBVM1C 14315 Vertical/Clear 1 4 9.058 7.012 5.160 1.805 3.222
DBVM1BR 09026 Vertical/Brown 1 4 9.058 7.012 5.160 1.805 3.222
DBVM1W 14316 Vertical/White 1 4 9.058 7.012 5.160 1.805 3.222
DBHM1C 77608 Horizontal/Clear 1 4 7.012 9.058 5.160 1.800 3.222
DBHM1W 77610 Horizontal/White 1 4 7.012 9.058 5.160 1.800 3.222
E170558
LR49636