Product Overview

E-10
Email: Sales@aifittings.com | Fax: [phone] | Tel: [phone] | www.aifittings.com
FLEX • AC • MC
Each fitting has an end stop, but
comes with additional end stop
bushings to accommodate several
cable sizes!
Cable Connectors
Zinc die-cast. For MCI-A • MC/HCF steel and aluminum cable • AC/HCF steel and aluminum
cable • Flexible metal conduit steel and aluminum (regular and reduced wall) • MCI cable •
Continuous corrugated aluminum • AC90 • TECK90.
FEATURES AND BENEFITS
• Low cost—saves time and money!
• Fast and Easy to install. There’s no need to remove the strap…just loosen the screws and insert the
bushing that works best with the cables you’re installing
• Our zinc die-cast fittings cost much less than steel or malleable iron fittings
• Reduces inventory—comes with additional end stop bushings!
• Built-in end stop in fitting
Refer to chart on page E-27 for list of cable types.
Concrete tight when taped.
PATENTED.
If you are using an end stop
bushing, determine which one
to use by sizing it to the cable
bundle (not the metal jacket).
Incorrect size shown above. The
metal jacket should never go
through the end stop.
1
Insert the appropriate end stop
bushing, making sure that the
half-moon shape is positioned
at the top of the connector.
2
No need to remove strap
—simply loosen the screws
and insert end stop bushing,
if necessary. Slip connector
onto MC cable. Retighten
screws on strap.
3
INSTALLATION INSTRUCTIONS
* Examples of 3- and 4-conductor cables. Cable dimensions vary dramatically between manufacturers. It is recommended
that cable O.D. (outer diameter) be measured to ensure proper cable-to-fitting installation.
Min. Max. Min. Max. Fitting A B C (AWG/KCMIL)
8412 .780 1.120 .660 1.000 1.018 .625 .750 .870
6/3, 6/4, 4-3, 4-4, 2-3,
2-4, 1-3
8413 1.000 1.460 .870 1.370 1.361 .782 1.032 1.132
2-3, 2-4, 1-3, 1-4, 1/0-3,
1/0-4, 2/0-3, 2/0-4, 3/0-3
8414 1.360 1.770 1.250 1.590 1.587 1.175 1.277 1.382
2/0-4, 3/0-3, 3/0-4, 4/0-3
4/0-4, 250-3, 250-4
8415 1.700 2.200 1.550 2.050 2.060 1.562 1.750 1.875
250-4, 300-4, 350-3,
350-4, 500-3
8416 2.100 2.700 1.950 2.400 2.462 1.979 2.194 –
500-3, 500-4, 600-3,
600-4, 750-3
8417 2.500 3.300 2.350 3.000 3.081 2.404 2.662 - 600-4, 750-3, 750-4
Catalog
Number
Cable
Outer Diameter
Wire Bundle
Outer Diameter
Throat Diameter
Fitting/Bushings (A, B, C)
Conductor Size
# of Conductors*
E123751
B
C
A
A
B
C
CATALOG
NUMBER
UPC/DCI/NAED
MFG #018997
TRADE
SIZE
KO
SIZE
UNIT
PKG
STD
PKG
DIM
A
DIM
B
DIM
C
8412 08412 1 1 20 20 1.756 .540 2.144
8413 08413 1-1/4 1-1/4 20 20 2.156 .683 2.575
8414 08414 1-1/2 1-1/2 10 10 2.466 .790 3.093
8415 00583 2 2 10 10 2.901 .792 3.700
8416 08416 2-1/2 2-1/2 5 5 3.218 .906 4.250
8417 08417 3 3 5 5 3.281 .972 5.000