Submittal

MC/HCF/AC Steel & Aluminum .480 to .610 25 250
MCI-A Steel & Aluminum .480 to .580
AC90, ACG90 .480 to .550 25 250
Flexible Metal Conduit
3/8" Flex*
Steel & Aluminum .560 to .610
Arlington’s snap in connectors save time by
eliminating the multiple steps required for a
90 degree 2-screw connector. And they
COST THE SAME AS A TWO-SCREW, 90 degree
connector.
for New Work and Retrofit
Made in USA
Single (Straight & 90 degree) • Duplex
www.aifittings.com
Arlington
*CSA Listed w/ anti-short bushing ONLY
38900AST
with insulated
throat
Tinted red inside fitting
4
0900ST 04099
40900AST 04092
w
ith insulated throat
90 Degree Snap2It® Connectors
40900ST
RED Tint
inside
40900AST
with insulated
throat, RED Tint inside
CATALOG UPC/DCI/NAED CABLE TYPE CABLE (OD) CABLE UNIT STD
NUMBER MFG #01 8997 OUTSIDE DIAMETER SIZES PKG PKG
MC-PCS CABLE .440 to .610
MC/HCF/AC Steel & Aluminum .440 to .610 25 250
MCI-A Steel & Aluminum .440 to .550
AC90, ACG90 .440 to .550 25 250
Flexible Metal Conduit
3
/8" Flex*
Steel & Aluminum .560 to .610
1
4/2 and 12/2
w/ and w/o ground
14/3, 14/4,
1
2/3, 12/4,
10/2, 10/3
38900ST 04098
38900AST 04093
with insulated throat
MC-PCS CABLE
.
405 to .605
14/3, 12/2 and 12/3
w/ and w/o ground
14/4,
1
2/4,
10/2, 10/3
Arlington’s one-piece RETROFIT SNAP
2
IT
®
fittings are easy to use in OLD WORK
installations. They’re ideal for adding additional circuits to a load center. And you
get the same time-savings in a retrofit installation as you do in new work!
Quick, easy installation – NO TOOLS required.
CATALOG UPC/DCI/NAED CABLE TYPE CABLE (OD) CABLE UNIT/STD
NUMBER MFG #01 8997 OUTSIDE DIA SIZES PKG
MC/HCF/AC Steel & Aluminum .405 to .605
MCI-A Steel & Aluminum .440 to .550
AC90, ACG90 .440 to .550 25/25
Flexible Metal Conduit
3/8" Flex*
Steel & Aluminum .405 to .605
MC/HCF/AC Steel & Aluminum .485 to .610
MCI-A Steel & Aluminum .480 to .610
AC90, ACG90 .480 to .550 25/25
Flexible Metal Conduit
3/8" Flex*
Steel & Aluminum .405 to .610
*CSA Listed w/ anti-short bushing ONLY
38RAST 13586
with insulated throat
Push assembly into box... ...snap it into the box.
Fast and easy. No tools required!
Pull MC cable
through knockout
in INSTALLED
old work box.
Snap fitting
onto cable.
14/2 and 12/2
w/ and w/o ground
14/3, 14/4,
12/3, 12/4,
10/2, 10/3
14/3, 12/2 and 12/3
w/ and w/o ground
14/4,
12/4,
10/2, 10/3
40RAST 13587
with insulated throat
Tinted RED inside fitting
Front
Back
38RAST
Back
40RAST
RED Tint inside
1
2
3
for use in INSTALLED BOXES • RETROFIT
2-screw
850
38900ST
over
90°
2-
screw
MC
connectors!
p
er
c
o
n
n
ecto
r
SAVE
1
Minut
e
Check that the cable’s outer diameter (OD) listed by the cable manufacturer
is within the OD cable range listed for the fitting. The cable jacket
should never be able to go through the end stop (of fitting).