Safety Instructions

10
IMPORTANT: Before playing a vinyl record, turn down the volume of the
Jukebox to avoid possible loud crackling noises. The crackling noises made by
the stylus coming into contact with the vinyl record could damage the Jukebox.
Wait until the stylus is completely placed on the vinyl record, and then turn up
the volume.
NOTE: the tone-arm will automatically return to the tone arm-rest after reaching.
Needle maintenance
a. It is recommended that the stylus is replaced as soon as you notice a change in the
sound quality.
b. Prolonged use of a worn-out stylus may damage the record. Wear and tear on the stylus
will be accelerated when playing 78 RPM records.
c. If the needle is dirty, it will also cause the quality of the sound on the record.
d. If you need to replace the stylus, follow these steps.
11
(2) Up, down scaffold pole
Lift the pick up arm and the tone arm gently to the
desired position over the record
Down, slowly Lower the pick-up arm.
(1) It is necessary to lock the screw counterclockwise
during transportation.
To use the turntable, loosen the screw clockwise
(3) SPEED SETTING
33/45/78 Three speed gears are available
1
FIXED SCREW
2
Up, down scaffold pole
3 SPEED SETTING
4
TONE ARM LOCK
5
pick-up arm
6
PLACING RECORD
7
PLASTIC NEEDLE GUARD
(4) TONE ARM LOCK
Turn on tone arm lock before use，Lock it back when
not in use.
(5) pick-up arm（tone arm）
(6) PLACING RECORD
Put records corresponding to the turntable,
Lift the pickup and place it lightly on the record,
You can play the songs from the record.
(7) PLASTIC NEEDLE GUARD.
Remove the stylus by pulling it straight down
and out,in the opposite direction of the
tonearm，Don't throw away the headgear
sheath，Need to be used again.