Safety Instructions

ManualsBrandsArkrocket ManualsElectronicsSaturn V Jukebox

USING THE FUNCTIONS

This Jukebox features an inbuilt FM Tuner with auto-search function and a 20 station

programmable memory. When using for the first time, press the POWER button and the

Jukebox will switch to standby mode. Press the ON/OFF button on the control panel or

the POWER button on the remote control to turn the Jukebox ON. The Jukebox should start

in FM radio mode, the LCD display will show FM 87.5MHz and the speakers will emit a fuzzy

sound (unless the frequency 87.5MHz contains a radio station in your area). If it does not

automatically start in FM radio mode, press the MODE button on the Jukebox or the

FUNCTION button on the remote control until FM radio mode is entered.

a. Press the STANDBY button”ON/OFF” (No. 9 on the Jukebox parts list or No. 2 on the

Remote Control Function List) to wake the Jukebox from standby mode. The unit will

automatically enter FM Radio mode.

b. Press and hold the NEXT/F.F or PREV/F.R button to search up or down the FM frequency to find a

station with strong reception（ 0.1 MHz or 0.05 MHz increments for each Press）.

c. Press（Hold it still for more than 3 seconds） the

NEXT/F.F or PREV/F.R

button ,The FM

tuner will automatically search up or down the FM band By(Encounter a strong signal

radio automatically play).

d. Auto search and Save:By pressing the “AUTO”button , the unit will perform an

auto-search from the 87.5 MHz upwards to find several stations. The AUTO function will

also save the stations into the Memory of the Jukebox. The Jukebox has a 20 station

memory to store the user s favourite radio stations which are labelled P01 P20

(Program 1 Program 20). The first station that the tuner finds will be saved into the

Jukebox s memory under P01, the second station that the auto-search finds will be

saved into the Jukeboxes memory under P02, and so on. This will continue until the

tuner has found all signals on the bandwidth OR until it has saved stations into all 20

programs.

e. Manual search and Save：Press the

NEXT/F.F or PREV/F.R

buttons to select a

station you like, and then press the" MEM" button to show "P01...", press "FR+ or FR-"

to select the location, and then press" MEM" to confirm the storage station. press "FR+

or" FR-" to select the stored station from "P01-P20” to play.

Note:

1）The American version of "FM" frequency, forward or backward, jumped 0.1 MHz;

2）The European version of the "FM frequency, forward or backward, jumped 0.05 MHz;

3）FM antenna,Stretch to maximum length , put in the radio effect is the best location.(FM

antenna In the back of the product).

4）Stations with a weak signal can only be tuned in manually.

5）A maximum of 20 stations can be stored. If there are less than 20 local stations with

strong signals, they can only be stored to all stations that can receive strong signals（If you

don't have 20 strong stations, you can't Store 20 position）.

6）All saved radio stations will be lost if the main power of the Jukebox has been switched off

or the Jukebox is unplugged from the power outlet（Only in standby clock display state can be

saved unchanged）.

7）When the machine is switched on again, the FM radio frequency of the machine will retain

the data from the last power outage(Preserve the last saved station state).

Key function

Speed-

brightenss-

IC number-

Seven color queue trail to right single direction

（ could go to the left）

Speed+

brightenss+

IC number+

Trail to right single direction(CS,C3,C7,C16)

Open curtain(CS,C3,C7,C16)

JUMP(CS,C3,C7,C16)

Controlled IC number

Setting

Water move to right direction(CS,C3,C7,C16)

Trail to left double direction(CS,C3,C7,C16)

Strobe(CS,C3,C7,C16)

16 kinds of static color choices

Horse race to right direction(CS,C3,C7,C16)

Horse race to left direction(CS,C3,C7,C16)

Seven color flutter

3 static color queue

Trill to right double direction(CS,C3,C7,C16)

Water move to left direction(CS,C3,C7,C16)

Auto-cycle mode

7 static color queue

Close curtain(CS,C3,C7,C16)

Trail to left single direction(CS,C3,C7,C16)

ON/OFF

16 static color queue

Switch warm white to cold white

●Changing mode and combination function description:

1. CS Button is used to select a static color (Red,green,blue,yellow,cyan,purple,white,orange,light

green,dark blue,dark yellow,light yellow,brown,light blue,sky blue,pink),after choosing the static color,and

then press the Dynamic Mode button in the right side,then it will be turn into this static color changing in

the model you chose.

2. C3 button is Red,Green,Blue these 3color cycle queues,press the dynamic models button on the right

side,then it will turn into these three color changing cycle.

3. C7 button is Red,Green,Blue,Yellow,Cyan,Pupal,White 7 Static color queue,press the dynamic models

button on the right side,then it will turn into these seven color changing effect cycle.

4. C16 button is Red,green,blue,yellow,cyan,purple,orange,light green,dark blue,dark yellow,light

yellow,brown,light blue,sky blue,pink these 16 color queue,press the dynamic models button on the right

side,then it will turn into these 16 color changing effect cycle.

5. this button is an independence changing model button,to press this button at any time,then it will

turn into the model of 7 color flutter.