Troubleshooting Guide

3. With the point facing down, align the new stylus and gently press it back into
place (see Fig. 3).
WARNING:
• Do not bend the stylus.
• To avoid injury, do not touch the needle.
• Keep out of reach of children.
• Handle with care as the stylus is delicate. Use of a bent or broken stylus may
damage the
record and cause malfunction.
• Do not expose the stylus to extreme heat.
• Contact a qualifed repair person if you are having diffculties changing the
stylus.
NOTE: It may cause the slide needle.
10
3. USB/SD operation.
a. Press "Mode" button until led display indicate " USB or SD", then display will
show number of folder, then number of songs and start playback.
b. Press "Next or Prev" or "F+/-10" to select your desire song.
c. Press "REP" once to repeat one song, the REP indication at the top left corner on
the led display will flash. Press the "REP" display "REP FOLDER" repeat
album;Press "REP" one more time to repeat all songs in the track and the REP
indication at the top left corner on the led display will appear. Press "REP" again
to cancel repeat function.
d. To play songs randomly, press "REP" button until the led display "RAN" on the
bottom of the display.
e. For programming, press "STOP" button to stop playback. Press "PROG" to enter
programming mode. The led display will flash and indicate "P 01", select the song
that you want to program and then press "PROG" again. Press "Play/Pause" to
stop programming and start to playback the programmed songs. This unit can
program up to 20 songs.
4. Recording function: in addition to the USB SD broadcast mode, the other player model
can be inserted into the U disk or SD card, press the "RES" or "ST/MONO" remote control for
the recorded And stored in a USB stick or the content of the SD card.
5. To begin pairing with a Bluetooth device.
1) Press "MODE" button until LCD display "bLUE" and wait for 3 seconds to make
the Jukebox speaker discoverable.
2) Turn on the Bluetooth device and let it automatically search for available
Bluetooth devices.
3) From the Bluetooth device list, select the device named "JUKEBOX".
4) Once the pairing is completed, the Bluetooth will indicated "connected".
To start playback songs from your Bluetooth device. You can control from your
Bluetooth device or from the Jukebox itself or remote control(provided).
a. Control from the Bluetooth device. Use keys on the display to select songs,
volume +/-, play/pause and next/prev function.
b. Control from the Jukebox/remote control.
c. Once pairing is completed, the song from the Bluetooth device automatically
start to playback.
d. Press "VOL+/-" to control the sound level.
e. Press "Next or BACK" to select next and previous song respectively.
f. Press "PLAY/PAUSE" to pause or continue playback.
g. To end the pairing, press "MODE" button to other functions or turn off the
Bluetooth connection from the Bluetooth device.
7