Troubleshooting Guide

USING THE FUNCTIONS
1.Radio operation
This Jukebox features an inbuilt FM Tuner with auto-search function and a 20
station programmable memory. When using for the first time, press the POWER
button and the Jukebox will switch to standby mode. Press the ON/OFF button on
the control panel or the POWER button on the remote control to turn the Jukebox
ON. The Jukebox should start in FM radio mode, the LCD display will show FM
87.5MHz and the speakers will emit a fuzzy sound (unless the frequency 87.5MHz
contains a radio station in your area). If it does not automatically start in FM radio
mode, press the MODE button on the Jukebox or the FUNCTION button on the
remote control until FM radio mode is entered.
FREQUENCY RANGE:
FM 87.5--108 MHZ
Note:
1）.The American version of "FM" frequency, forward or backward, jumped 0.1
MHz;
2）.The European version of the "FM frequency, forward or backward, jumped 0.05
MHz;
3）. FM antenna, it needs long, put in the radio effect is the best location.(FM
antenna In the back of the product).
2. CD operation (CD should be placed on the tray with the label side up)
a. Press "MODE" button until led display indicate "- - - -", then display will show
number of songs and then begin to start playback.
b. Press "►II" to select your desire song；fast forward, press to fast forward through a
track. You can then press the playback button to start playback.
c. Press "REP" once to repeat one song, the REP indication at the top left corner
on the led display will flash. Press "REP" one more time to repeat all songs in the
track and the REP indication at the top left corner on the led display will appear.
Press "REP" again to cancel repeat function.
d. To play songs randomly, press "REP" button until the led display "RAN" on the
bottom of the display.
e. For programming, press "STOP" button to stop playback. Press "PROG" to enter
programming mode. The led display will flash and indicate "P 01", select the song
that you want to program and then press "PROG" again. Press "Play/Pause►II"
to stop programming and start to playback the programmed songs. This unit can
program up to 20 songs（ Further info on this function on page 8）.
6
REMOTE CONTROL DIAGRAM
PROGRAM:
a. While playing back from a music source, press the stop button.
b. Press the program button to enter the program mode. The word PROG will
flash in the bottom left corner of the display screen. A position number will
also be flashing on the screen (eg: p01).
c. Press the next or back buttons to select which track you want to program
into position. When you have made your selection, press the program
button to save it.
d. You can then repeat the same steps to fill in more positions.
e. When done, press play to begin your music playback. You can do this at
any stage once you have programmed the amount of tracks you want.
f. At any stage during the program process you can press stop to cancel.
g. 'FUL' will display on the LCD screen when the Max amount of memory
location have had been filled.
11