User Manual

-22-
WP3 ---------WP 3 On/Off
Lng Dist --------- Waypoint 3 East-West distance away from Home (m)
“>” means East and “<” means West
Lat Dist ---------Waypoint 3 South-North distance away from Home (m) “︾”means South and
“︽” means North
Height ---------Waypoint 3 Height(m)
WP4 ---------WP 4 On/Off
Lng Dist --------- Waypoint 4 East-West distance away from Home (m)
“>” means East and “<” means West
Lat Dist ---------Waypoint 4 South-North distance away from Home (m) “︾”means South and
“︽” means North
Height ---------Waypoint 4 Height(m)
10 Balance Mode and RTH Adjustment (Very Important)
Arkbird’s default parameters will be ok for most plane types. But if the most ideal situation expected, please
refer to the following methods:
First time installation, do a neutral point alignment. Plane shall be put paralleled to the ground before
neutral point check, moving aileron stick left and right to get start. (Refer to CTL menu)
Roll the plane to right and left 45 degree after neutral point check to see if OSD horizon line tilts accordingly
and quickly.
Please fly on default and record OSD video on the ground. Observe the attitude through OSD and adjust
parameters.