User Manual

-17-
Set OSD Parameters
Language Chinese/English Page switching
Show Lat-long Show longitude and altitude
AD Calibrate Battery voltage calibration
OSD Pattern OSD interface selection
Default: Normal interface
Fighter:HUD interface
P or N (Xin) PAL/ NTSC selection
Show RSSI Display the AR port's voltage, 0-3.3V is corresponding to 0-100%
Cur Man Calibrate Current calibration %. The current sensor will adjust and input the correct
power. Consumption after landing to calibrate the displayed battery capacity
(MAH).
Unit Ft(imperial)and Meter(Metric)Unit Selection；
LowPowerAlarm There will be a flicker alarm when flight power is lower than this value.
Flight Parameters
Roll Roll Reverse
Pitch Pitch Reverse