User Manual

-5-
You can see the supported languages in the menu button of “Languages” in the menu bar.
7.Map Switch
Click on “Map” to select and switch to the desired map source, it is recommended to use Google Map. The
first loading is slow which takes about 20 seconds.
8.Save Offline Map
Arkbird ground station can buffer the map files like most of other ground stations, buffer the map into the
system cache folder simply by zooming in/out the window, automatically loaded when disconnected from the
network.
But there is risk of easily losing caches, so we provide the offline saving of the frame selected map, so that we
can open the map from time to time, from place to place, free from the dependence on network access.
Select the appropriate map source, hold down ALT, press on the left mouse button to frame-select the area.
Then click “Save Map” in “Files”, select the “Save Level”, “Save To” to save the map offline.
(Error message will pop up if you don’t hold down ALT but directly select “Save Map”)
Select the appropriate zoom level (the higher the zoom level is, the slower the saving is), click on “No” to skip
this zoom level, click on “Cancel” to select the hard disk position.