User Manual

-12-
433 module default settings
915 module default settings
Ⅳ. Exchange of Coordinates for Two Aircraft Formation
If two sets of Arkbird-OSD Autopilot are connected to Arkbird serial module interface, it can achieve the
exchange of coordinates as the other’s waypoint, OSD displays the position, tracking formation can be
automatically done in switching the waypoint mode. (It cannot be simultaneously used with the ground station
software)
It is recommended that firmware version of two Autopilots should be consistent for the avoidance of
communication failure. Select “CustomMode” as “Waypoint”, it will automatically fly by tracking the coordinates
of the other aircraft in switching waypoint mode (CH5>50%, 30%<CH6<75%).